Rear Bumper: Service and Repair

Replacement

NOTE:
- After remove the rear combination lamp.
- When prying with a flat-tip screwdriver, wrap it with protective tape , and apply protective tape around the related parts your hands.
- Put on gloves to protect your hands.
- Take care not bend or scratch the cover and other parts.

1. After loosening the mounting nuts, move the
combination lamp (A).




2. Loosen the mounting nuts.




3. Loosen the mounting screws.




4. Remove the transverse trim.
5. Remove the luggage side trim.
6. Disconnect the connector (A).




7. Loosen the mounting bolts.




8. After loosening the mounting screws, remove the rear bumper (A).




9. Installation is the reverse of removal.

NOTE:
- Replace any damage clips.